hello all, got this from LHS,after assembly & quick measurements,it will fit inside NB axle case with simple mods.It has variable gear ratio options.I will try the mod soon,will post results

P2

P3

P4

I do not know the entire gear box ..

9.6 Volt? 7.2 Volt? ..

His speed will be .. Quickly? .. Slow? ..

The latest gears of mr flapding had 90/1 ( ratio ).. I think ..

You had to buy 2 sets ... $$$$$$$

I await your results .. THANK .. COBRA98

Hi loulou,this particular gearbox will accept Stock NB motor with final drive ratio of 64.8:1,only $12.00'other gears and gearbox cases can be purchased CHEAP,under$20.00, to achieve ratios over 1500:1

This message has been edited. Last edited by: cobra98,

64.8:1 this is very good ..

newbright the stock 45:1 ..

The first set of gear for mr flapding 70:1 ..

MIX-CRAWLER had this set and it was strong enough ..

Here is a small video MIX-CRAWLER 70:1 :-)

http://www.youtube.com/watch?v=WKE0_GRoEkY

Nice vid loulou

quote:

Originally posted by cobra98:
Hi loulou,this particular gearbox will accept Stock NB motor with final drive ratio of 64.8:1,only $12.00'other gears and gearbox cases can be purchased CHEAP,under$20.00, to achieve ratios over 1500:1

I got a coupl eof the tamiya 1400 :1 gear boxes, the are great fo rthe little motor that is in them maybe for a winch. The problem is the motor is so small and all my gear is 1:6 , I cannot see a bigger motor being fitted into this gearbox

cobra98 .. j33p33r ...........

What are the motors in these gears box ?

The axis of newbright can he replaced the axis that are already in place in the gears box ?

.. Or should he use those already in place ? THANK

Hi loulou,The motor in the gearbox is a 260.The stock NB motor will fit,just need longer screws for attachment.The NB axle will fit with minor mods.Instead of useing gearbox in pic above,I ordered 2-6speed gearboxes for my build

Hey wayne here is link to gear boxes http://www.hobbylinc.com/htm/tam/tam72005.htm

Cobra98 .. All this is very interesting ..

I let you continue your project ..

Give us pics of each stage of assembly .. If possible ..

PS .. I still have a few NB complete diff .. Front and rear .. THANK :-)

quote:

Originally posted by loulou:
Cobra98 .. All this is very interesting ..

I let you continue your project ..

Give us pics of each stage of assembly .. If possible ..

PS .. I still have a few NB complete diff .. Front and rear .. THANK :-)

Loulou,when you get your 1:6 Landrover,you can send me all that 1:10 stuff

COBRA98 ..............

YELLOW-CRAWLER will certainly need spare parts .. He worked very hard on the rock ..

He already two sets of tires (8) to his account ..

The pieces for the 1/6 will be more rare, I am sure .. $ $ $ $

go to bed .. bye :-)