http://video.google.com/videoplay?docid=-1562671549765780434&hl=en

This is kind of a silly video. not really too extreme. Hope you enjoy it and I just want you all to know that it worked 100% after both motors got submerged. You just need to rinse, drain, and WD-40 everything after.

WKCRAWLER.GrandCheroCrawler :-)

It does not miss fins with your crawler.
Good video, ...are your tires to cut in a certain manner?

thanks loulou. Haha, only ONE of my tires is cut up nicely (if you look closely, its the front right tire) I didn't have the patience to do it to the other 3. No BB'S in the tires either. You're looking at a stock crawler (ok, its not totally stock because one tire is modified but throw me a bone here. lol)

Your crawler is of my taste, finish the 3 other tires and you will leave this hole. : -)

Well, there were other forces working against me in this video not including the tires that prevented me from doing a good job of muddin.

1. I was being bitten by mosquitoes left and right (a few times, I moved the camera by accident to kill bugs on my shoulder.)
2. I was holding a video camera, and trying to use one hand to control throttle and steering
3. The battery was probably 80% used up when I shot this video. Very poor performance to start with.


But those aren't excuses

This video is very well, the next one will be better. THANK YOU for the video .

This message has been edited. Last edited by: loulou,

lookin good grandcherocrawler, that battery was definatly toast, maybe the next time you can make it up and over (jokes) heh heh heh

Well, finally finished cutting the other 3 tires. Man, it is so much easier cutting the lugs off with a sharp hobby knife than trying to solely rely on a dremel for a perfect cut.

Heres an updated look at it as of today: