p3

I was thinking the same thing.. To bad Tamiya is not updating them bodies

yes wayne it is a shame .i love these models .it is the attention to detail that makes them attractive iam just a sucker for them ,lol

NAT .. show me the place that heats on the panel that under the panel, and where I could install the system on my LAND ROVER .. Electronics is wrapped in plastic .. THANK ..

loulou i do not have the 1/6 lr3 all these models have a difference in the electronics j33p3r will have a pic of this .but in order for the electronics to be cool,d you will need to remove the plastic covers .

LOULOU HERE IS A PIC OF THE STOCK ELECTRONICS FROM THE 1/6 BUG IT IS THE PARTS MARKED SPEEDO CHIPS THAT GET VERY HOT BUT THESE ARE DIFFERENT TO THE LR3

OK .. I will have to cut covered with plastic, under my track reinforcing .. and install two fans on top ..
I took the (power) to what place?

YOU WILL NEED A SEPARATE POWER SUPPLY A 9V0LT BATT WORKS WELL .

OK .. NAT .. I will study this system .. THANK .. :-)

This message has been edited. Last edited by: loulou,

Hi, I was testing my car for last 2 weeks. It needs fans. Loulou you were right that it isn't crawler, When I'm climbing, only front wheels have power.
Epoxy for difflocks is to weak. I broke it twice.

JACOB S ..
The only way that I find so all four tires turn at the same time, on my crawlers 1/10 NEWBRIGHT, was to install a fourth gear (34 X 10) .. the ratio is much stronger (184/1) stock NEWBRIGHT (45/1), the force is spread over all four tires .. if my crawler has the front tires in the air, the rear tires, turning them also .. and it can climb as a true crawler .. should be the same work on LAND ROVER .. to make a crawler ..And also install two fans ..

YELLOW CRAWLER .. TEST ..
http://www.youtube.com/watch?v=sQ8C-eMH6Fc
BLACK-FLY .. force ..
http://www.youtube.com/watch?v=oQIc-PPiCoE
YELLOW CRAWLER ..
http://www.youtube.com/watch?v=WAPqQZ6EAlY

This message has been edited. Last edited by: loulou,