I have a hummer from radiocshack and am treating him to replace the original electronics, i started with a servo "rc-exceed" the servo enters well but I do not find the way to do the bars do his function. what i can do? Im sorry for de bad writing XD Im for Dominican Republic and my english is bad.

hummer problems video

quote:

Originally posted by Alvin4x4:
I have a hummer from radiocshack and am treating him to replace the original electronics, i started with a servo "rc-exceed" the servo enters well but I do not find the way to do the bars do his function. what i can do? Im sorry for de bad writing XD Im for Dominican Republic and my english is bad.

hummer problems video

No Good translate english to Dominican. I no understand good words translate to you. servo moving on you. servo mounting better make solid. People help have hummer hope.

Alvin4x4 .. welcome on the forum ..

Go to HOBBY GRADE is a good idea, give us a few pics of your installation, and we will see what to do ..
If your servo motor is installed, it should not be a problem to set the rods ..

I don't have pictures in right now, because mi cam i broke. I have the servo motor installed but in don't understand What is the funtion of that piece?

Hi alvin 4x4,welcome to the forum.....from watching the vid, it looks like you need a more solid mount for the servo,and may need to re-locate the mounting points of steering rods

OK, I did not see that there was a video .. as cobra98 says, it is true on the video, the servo motor is not secure .. it does not move, it must be fixed very firmly .. and if you installed a servo motor HG, you need the whole kit HOBBY GRADE ..esc / controller ..

http://images.google.ca/imgres?imgurl=http://www.rc-rac...1%26hl%3Dfr%26sa%3DN

quote:

Originally posted by cobra98:
Hi alvin 4x4,welcome to the forum.....from watching the vid, it looks like you need a more solid mount for the servo,and may need to re-locate the mounting points of steering rods

and maybe going to a 2 rod setup. Servo working on wheel and rod working both. Hard to explain in English for him to translate back to Dominican.

pictures would be helpful for him.
still have pictures of the setup you did in the front cobra? His he is using a push-pull method.
mainly only effective on planes like rudders.
Kneed allot of leverage for a car/truck and %s
of rake. Most R/Cs that are working push-pull
have the front raked like a bike some what

H i alvin4x4,...Wayne makes a good point.....changing your steering rods to the type in the pic may also solve your problem

Here are some pics of hummer of GV280Z .. sees his link ..

http://rcboards.com/eve/forums/a/tpc/f/8401055751/m/8011057732

lou lou is that your NB with all the hobby grade eletronics?

roverforce ..

All my crawlers, except BLACK-CAB, has electronics stock ..

YELLOW-CRAWLER/MIX-CRAWLER/ZZTOP-CRAWLER/DODGE RAM / HUMMER-RUBICON / LAND-ROVER / .. ETC ..

My HUMMER-RUBICON owns stock electronics, and it is proportionel trottle .. why change when everything is going well ..



Click here to watch RUBICON-TIRES-PARKING

Click here to watch RUBICON-GROUND-1-18


Click here to watch RUBICON-GROUND-3

Click here to watch CRAZY-CRAWLER

http://www.youtube.com/watch?v=4XLrjRwpjA0