2.0 mm :-) you are OK

loulou i received a lovely peace of aluminium checker plate to day from my neighbour 2 meters square .just right for cutting up for the jeep floor

good old joe my neighbour he loves my r/c work .and is a great help with materials .

.. NAT .. you should build a crawler with a new JEEP 1 / 6 .. and complete your pimp cane by lost time .. just an idea ..

I would like to see you build a crawler .. give us an appointment ( on this forum )this fall ? ..

################################################

So, it will slow down significantly JEEP 1/6, and give it more strength .. improved flex max .. installed FLAPDING / SEAND shock .. or OIL SHOCK 9 NAT )installing more efficient motors .. Building a ((cabin)).. installed roll bar .. installation of an antenna metal .. installation of track-bar .. installation of rock-slider .. find ? softer tires .. ((( ESC .. NAT ))) etc ..

Labour prespective .. but the pleasure is always there ..

its a good idea loulou i agree and would love to but as i have explained to cobra 98 .it is getting difficult now to purchase these r/c at a good price ,also hobby parts not as cheap due to inflation ,its killing the hobby .but i shall press on with the projects i have started .may be times will change ,,

Watch for bargains on EBAY .. if I have a bargain on EBAY, I will buy, and the mods begin this fall ..


NAT .. the JEEP 1/6, is a good donor, to build a crawler .. is a JEEPPPPPPPPP

you never let us down loulou i know .i will wish for bargains on ebay for you but my budget for this year is exceeded .it remains for me to mod the trucks i have at present till next year when new r/c will be purchased .i will keep my eyes open for a 1/6 lr3 and mod as you have done .

OK .. NAT .. it will be for another time .. I will follow your work on your PIMP CANE, and your BUG .. GOOD for the LR3 .. THANK .. NAT


################################################
.. MEMO .. MEMO .. MEMO ..

.. My last work on my LAND ROVER 1/6 ..

################################################


HELLO ..

I drilled a small hole in the hex .. it remains to be drilled, four shaft ..

I will pull them out of the diff, to be sure to do a good job ..

Then, a small metal pin will be inserted into these holes to secure the whole ..

The rear shaft, will have two hex, so these wheels are stronger .. Inside the rear wheels should be reworked to accept these two hexes ( if the work can be done ? ) .. THANK ..

This message has been edited. Last edited by: loulou,

very good work loulou as always ,, will need to install this on my bug also ...

a must for the 1/6

NAT .. I love your BUG ..

With a single motor, the mods for speed are numerous .. no question of making a crawler :-)

.. I have not yet done my small hole in my four shaft ..

I have a small contract of music, complete, and then I resumed my work on my LAND ROVER ..

I play music (guitar) traditional, in a large restaurant, L'ILE D'ORLEANS .. QUEBEC to .. with one of my friend (accordion) for a few days ..

http://www.cabaneasucre.org/relaisdespins/english/



PS .. your girl is certainly a very good girl .. it gives off an air of goodness .. BYE ..

thanks loulou the place you work with your music looks very good and the menu is excellent i must visit you some day it would be good ..

THANK .. NAT ..

HELLO .. friends ..

I finally drilled my four shaft .. pines are installed ..

The next step will be to, reworked the rims, so that it fits on these new hexs metal .. completed hexs of plactic, which broke easily ..

my future JEEP 1 / 6, will certainly have this mod .. pines, are nails .. they are very good for the job ..

THANK .. .. NAT for your good advice ..

[IMG]

This message has been edited. Last edited by: loulou,

looking good loulou very nice work

THANK .. .. NAT ..
I prepared the rims (4) that I purchased, to prevent trouble ...........

.. NOT A TOY .. PICS


.. They will be very useful to my JEEP 1/6 .. these rims will be more solid and lasting .. on the rock, heart rims, absorbs a lot of strength .. and I wants nothing broken away from me :-)



PS ..
The stock rims, LAND ROVER, may be resettled, (if desired) ..
I will simply removed the metal hexs + small pines and resettled stock rims ..
The reworked rims can be installed on the JEEP 1/6 .. and I will always be a set of 4 tires and rims, spare.


THANK ..

.. HELLO ..

I reworked my rims (LAND ROVER 1/6 NEWBRIGHT) ..

The hexs metal (in replacement of old hexs of plastic) will be installed on the shaft LAND ROVER ..


.. FRONT WHEEL ..



.. REAR .. WHEEL ..








The hexs rear double than the front (a threaded rod, maintain 2 hexs of metal together ..



This system will allow me to build a crawler (JEEP 1 / 6 NEWBRIGHT) whose rims are stronger (solid) .. In anticipation of my future outings, on the rock ..

This message has been edited. Last edited by: loulou,

.. I still have 2 rims of LAND ROVER to complete, for the installation of metal hex ..

((( .. These rims, will serve on my future JEEP 1 / 6 .. I installed my 4 spare tires on my LAND ROVER .. )))





I will installed on my future JEEP 1/6 ..

LAND ROVER it will stay with its hex of plastic, for the moment ..

The LAND ROVER has 4 hex plastic ..

My 4 spare tires, has 4 hex plastic ..

And my future JEEP 1/6, 4 will also .. therefore, I can I use these hexs plastic for now, on my LAND ROVER ..



.. THANK ..

This message has been edited. Last edited by: loulou,