Anyone have another good alternative to those "jameco" motors - they seem to be permanently out of these things,, so I am open to an alternative..
looking for crawler torque, not speeeeeed
ps - I have read the posts, most refer to this motor, that's why I am after a couple .. forgot to mention - would like to stay with the stock electronics !
thanks
This message has been edited. Last edited by: phatchantz,
Here ya go, take a look at this one: http://www.ledico.com/nichibo/products-e21.htm It's in stock at Jameco here: http://www.jameco.com/webapp/wcs/stores/servlet/Product...d=231941&pa=231941PS It's got around 5000 more rpm than the 19160 and 15 gcm's more torque and runs at aroun 1.6 amps stalled out which is great..however, it's a 24 volt motor..I don't know how it will respond to 9.6 volts..it may work fine..it may be weak, it may not run at all or it may pull more stalled amps because of running at such a low voltage. I don't really know..this is a good one for Tikoni or BS257 or Flapding. Come all ye engineers!
Phatchantz I've got four of these 19160 motors unused, I really don't mind sending you a couple and anyone else that wants a set can have the other two. 1 set I've tested, installed in a truck and broke them in, they seemed okay. The other set has never been run at all.
I'm actually looking for 4 and I don't mind paying whatever your feel is appropriate - your cost, shipping and what not - send me whatever info at phatchantz@removethishotmail.com - I can do paypal, cashiers cheque - whatever -
appreciate it - I'm doin' up 2 of my 3 NBs, that's why I'm after 4 - if you just want to do me 2, that's great too
