hi guys i was doing some research and found these on ebay they are from the henlong tank .i know cobra has experimented with the tamiya gearboxes without success .these are all metal gear and look to be very strong .from what i can see the motors look to be 280s and they are high tourqe .may be a idea for the 1/10 install . any how check them out ........... http://cgi.ebay.co.uk/1-16-HENG-LONG-SUPER-STRONG-REPLA...ksid=p3286.m14.l1318
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
with a bit of fabrication work these could do wonders for the 1/10
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
hi ark not sure of the ratio but should be low as they are for the henglong tank . they seem to have much more power than the tamiya version .
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
Defineatly stronger than the Tamiya boxes. Cobras idea was excellent, too bad the gears could`nt handle the task.
I think Dhoom will get a gear set like this as well as some 280`s over the Winter. I keep stripping my rear Pinion, I`m on # 3 as off last week. The rig works very well but the gears dont seem up to the task when I get climbing the tough stuff. I get a few runs in and BOOM. I know that when I put a 280 under the Hood it will most likely break everything else.
i understand ark i think those cobra had were plastic gears .but i thought they would work .seems not .best to shop around for these ark i have come across a lot of different prices . but would be good for the 1/10 i think would take a lot of abuse the all metal gears .
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
of course the gearbox ratio will be changed once this gearbox is installed in the 1/10 due to tyres and pinion . but should work good .
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
Gear reduction would be my only concern. The Henglong offers a 3:1 reduction ratio. That may be low enough for a one inch high Tank Track but most likely too high for a 5.5 inch Crawler Tire.
Originally posted by A.R.C.: Gear reduction would be my only concern. The Henglong offers a 3:1 reduction ratio. That may be low enough for a one inch high Tank Track but most likely too high for a 5.5 inch Crawler Tire.
i see the ratio is 3.1 as you say ARK when the crawler wheel is installd this may be not low enough ratio .i will keep looking for more suitable .gear box that has the same strength. may be if i can find a large scale the ratio could work out .
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
One day, someone showed me a glass of water that was half full. And he said, "Is it half full or half empty?" So I drank the water. No more problem. ~Alexander Jodorowsky.....
