who makes 'em for YJ's? I know Tera Flex has one but it looks kidna cheesy. Im think'n of just fabing my own, anybody have pictures of what they have done?
------------------------------ 93 YJ, 35" MT/Rs, 5.5" lift, HP D44 front, D44 rear, 4:1 tera low, locked, geared, dented and scarred.
06 Ranger 4x4.
Posts: 8209 | Location: Corona California | Registered: December 26, 2001
I have no pics, but mine is very simple. I cut off the old upper mounts, flush with the top of the frame. I then used a piece of 2x2x.125 wall square tubing with .25"x2 bar on the ends that extend down into the pocket left from the old mounts. I welded 4 shock mount tabs to the 2x2 for upper mounts, then gusseted the the 2" on the ends and welded it all to the frame. The tubing sits flush with the bottom of the tub (3" body relocation), upper shock is about 1/8" from tub. This set-up allows me to use a 32" long shock with 13" of travel (Rancho RSX).
95 YJ Dual high pinion Dynatrac 60s, 5.13 gears, 4.3L Chevy, SM465, Atlas II, 8 lug MRT Beadlock 15 X 10, 42x15x15 Swamper TSL, spool rear, Detroit front, 35 spline shafts F/R, 1410 t-case yokes, 4 wheel disc brakes, fuel cell, 4.5" RE extreme duty, Warn 9.5xp, 8 point rollcage
Posts: 128 | Location: Greensburg, KY | Registered: February 06, 2003
93 YJ, 35" MT/Rs, 5.5" lift, HP D44 front, D44 rear, 4:1 tera low, locked, geared, dented and scarred.
